1. hole pattern hexagonal or round
2. smallest hole can be 1.5 times of material thickness
3. No blind hole, smooth edge
Product Description
Application of steel insect nets mesh
The insect screen is arranged around the smoke detector to prevent the penetration of insects in a smoke detection region. Insect screen is made of stainless steel grade type 304 or 316, and usually thickness is from 0.1 mm up to 0.2 mm. The insect screen has uniform mesh pattern which is hexagonal or round and has 20-50 meshes per inch.
Why use photo etching to the steel insect nets mesh ?
By photo etching, the edges of the holes is smooth without any burr.
There will be no blind holes, what' more, we can open small hole diameter per your requirement.
insect nets mesh with features other processes would find difficult or impossible to make can be made by the chemical etching process. During the etching process we dissolve any unwanted material allowing us to create intricate features in the form of very fine webs and very small holes.
For the width of the webs in a filter mesh, the general rule in design is webs must be at least 2/3rd the thickness of material. For instance, on a Filter mesh etched out of .010 thick material the webs on the screen must be at least .006 wide.
Our process can also make insect mesh that require small holes. The openings on the insect mesh must be at least 1.5 times of the material thickness. Therefore on a 0.12mm thick insect mesh the holes must be at least 0.18 mm in diameter.
More steel insect nets mesh pictures
Company Information
Shenzhen ZhuoLida Electronics Co., Ltd. is a company specializing in the research and production of steel insect nets mesh , by using the photo etching technology.
Our company is ISO9001:2008 and ISO14001:2004 certified.The products we make are widely used in electronics, personal care, sensors, precision measurement, hardware, semiconductor, optical, Communications, automotive engineering, medical, aerospace, petrochemical, military, precision engineering industries, etc.
We had exported our BeCu Spring to USA, Germany,Australia, Singapore, Malaysia and Japan.
FAQ
1. Are you factory or trade company?
We are factory has 12 years experience in the photo etching filter mesh area, not trade company
2. Is your factory ISO certified?
Yes, we are ISO14001:2004 and ISO9001:2008 certified
3. Can we visit your factory?
Welcome your coming and visit our factory.
Our factory is near the Shenzhen Bao'an air port, working time is from Monday to Friday,
8:00- 12:00 am and 13:30 to 17:30 pm.
4. Can you provide us some samples?
We are glad to provide you some samples free. We had some filter mesh parts in stock, and can send them to you for your review.
Please feel free to contact us today if you have any other questions or need a quotation.
Contact: Selina Liang
Skype: julid2012
Tel: +86-755-61501695